Hydro insulation materials/Drizoro systemPaints and protective coatings


MAXSHEEN is water-based acrylic paint that provides a durable surface coating. Optionally, you can obtain a smooth or textured appearance.


  • allows the walls to breathe;
  • fast drying, depending on temperature and humidity;
  • flexible;
  • high class resistance to rust and dirt;
  • easily cleaned;
  • attractive colour palette;
  • non-toxic and non-flammable;
  • resistant to alkalis;
  • easily applied.

Scope of application:

  • protection against carbonization of concrete structures, bridges, industrial and residential buildings;
  • decorative finish with necessary texture and colour on MAXSEAL, CONCRESEAL PLASTERING and MAXQUICK;
  • decorative waterproof coating for masonry, concrete, plaster, ceramic and wood surfaces.


MAXSHEEN ELASTIC –water resistant elastic dispersion acrylic coating for facade decoration. Perfect coating of various surfaces, such as concrete, plaster, masonry, etc.


  • protects concrete against carbonization;
  • resistant to CO2 penetration, protecting reinforcement against corrosion;
  • vapour permeable coating;
  • breathable surface;
  • elasticity;
  • retention of properties over a wide temperature range;
  • fade resistant, UV resistant;
  • resistant to alkalis;
  • easily applied and cleaned;
  • non-toxic, non-flammable;
  • ecological product.


  • protect concrete structures from carbonization in bridges, industrial and civil buildings;
  • waterproofing and decorative finish of facades and architectural elements and protection from the rain, maritime climate, freeze/thaw cycles, pollution, etc.;
  • good adhesion to MAXSEAL, MAXSEAL FLEX, CONCRESEAL PLASTERING, MAXREST, allows to achieve the desired texture and colour;
  • waterproofs and removes defects and cracks in the facade.


MAXGLAZE is acrylic-based emulsion. It seals and protects concrete and masonry from atmospheric pollution and rainfall. It is a milky white liquid which after coating is turned into transparent mat finish.


  • coating is resistant to UV, non-yellowing;
  • breathable surface;
  • good adhesion to the substrate and easily applied;
  • does not lose properties when applied on alkaline surfaces;
  • non-toxic and non-flammable;
  • protects the surface from dirt, smoke, dust and damage.

Scope of application:

  • concrete surface protection;
  • reinforced concrete slabs, decorative works of stone and plaster;
  • medium or high porosity ceramic tile protection.


MAXGLAZE-D is a fluid from methyl acryl ensuring resistance, strength and glossy protective surface to concrete, masonry, and plaster. Maintains cleanliness and natural texture. It is also protection against freezing, corrosion and other adverse weather effects.

Scope of application:

  • concrete protection;
  • network security;
  • masonry protection.



MAXELASTIC PUR is a single component ready to use liquid product based on polyurethane resin. After polymerization this product forms a solid high-quality waterproofing membrane that provides long-term protection and waterproofing of concrete, cement, mortar, bricks etc.


  • elasticity at low and high temperatures under vibrations;
  • crack waterproofing;
  • adhesion to all surfaces;
  • coating resistance to ice, sea water, salts, alkalis and acids;
  • operating temperature from –40 °C to 100 °C;
  • long-term protection/durability;
  • ready to use, easily applied;
  • resistance to abrasive wear.

Scope of application:

  • coating of roofs, terraces, balconies;
  • water tanks, industrial tanks, etc.;
  • coating and waterproofing of cracks, moving structures, metal tanks and pipelines;
  • waterproofing under ceramic tiles (kitchens, bathrooms).


MAXURETHANE FLEX is a flexible solvent-free two-component polyurethane waterproofing membrane used for long-term protection of concrete and metal surfaces.


  • non-toxic, non-hazardous for drinking water;
  • full flexibility and elasticity;
  • seamless waterproofing membrane adapting to the surface geometry;
  • chemical resistance to sewage, sea water, oils, fuels, acids, alkalis, etc.
  • bonding with concrete and metal surfaces;
  • resistance to wear and abrasion;
  • solvent-free, non-flammable, suitable for use in low-ventilated areas.

Scope of application:

  • drinking water reservoirs;
  • swimming pools, fountains, water channels, pipelines, etc.;
  • wastewater treatment plants, chemical storage tanks;
  • foundations, retaining walls, load-bearing, underground structures;
  • terraces, balconies under ceramic tiles;
  • wet rooms (bathrooms, kitchens).


MAXURETHANE 2C is a two-component aliphatic polyurethane coating that provides protection from sewage, flexible, becomes very strong after curing. Suitable decorative finish for paving and floors, requiring high resistance to wear. Proposed two types MAXURETHANE 2C finish: glossy and matte surface.


  • resistance to aggressive chemical compounds;
  • resistance to UV;
  • resistance to temperature changes;
  • suitable for contact with potable water;
  • excellent adhesion to substrates;
  • high resistance to wear.

Scope of application:

  • parking lots, docks, sidewalks, shopping, sports centres, etc.;
  • metal structures, bridges, sewage treatment plants, harbours, tanks, etc.;
  • protection of drinking water reservoirs, internal surface insulation;
  • concrete, metal or wood for surface protection;
  • field work.