Valves and seals are used as shut-off valves in plumbing, sewage, gas and other systems.
Valves can be: flanged, socket, threaded, with smooth ends and different.
Flanged valves and seals are commonly used in trunk water supply networks, socket or threaded bolts – in water supply entry connections.
Possible entry valve diameters from 25 mm to 63 mm. Material – ductile cast iron, coated from the inside and the outside with at least 250 µm epoxy coating.
Flanged valves and closures are available in diameters from 50 to 1200 mm. Flanged valves are made of ductile cast iron, coated from the inside and the outside with at least 250 µm epoxy coating. Wedge of the gate valve is made of ductile cast iron and vulcanized with elastomer.
All flange valves are PN16 pressure class, valve flanges meet LST EN 1092-2 standard (PN10 or PN16 pressure class). Flanged valves are long (F5), short (F4) and complying with the GOST standard.
Knife gate valves are used in sewage networks. Possible diameters – from 50 to 600 mm. Knife gate valves can be with rising or not rising shaft. They may also have one-way or two-way sealing.
Valves and seals can be equipped with an electric actuator conforming to IP68 protection class.
- high quality;